PIPE INSERT SLEEVE
Manufacturer and suppliers of pipe insert sleeves in India.
The most prominent manufacturer of pipe insert sleeves for internal coated carbon steel pipes in India who is PetroSan. According to the needs of the end user and the application, PetroSan manufactures sleeves like petrosan insert sleeve, petrosan pipe sleeve, pipe sleeve, corrosion protective sleeve, pipe protective sleeve, powder coated sleeve, epoxy coated pipe sleeve, insert sleeves for internal coated pipes, pipe internal insert sleeve, Insert sleeve, Pipe ID insert sleeve, Petro pipe insert sleeve, Internal pipe Sleeve, Steel pipe insert sleeve.
The international coating is kept safe during welding by the inventive insert sleeve used in the Petrosan sleeving system. It does away with costly custom fabrication and provides a flexible and affordable way to create in the field:
Pipe Insert Sleeve.
A pipe internal insert sleeve is a type of pipe fitting that is inserted into the internal diameter of a pipe to:
1. Line the pipe internally.
2. Provide a smooth surface for fluid flow.
3. Protect the pipe from corrosion or wear.
4. Repair damaged or corroded areas.
5. Enhance pipe durability.
Internal insert sleeves are typically used in situations where:
1. The pipe is damaged or corroded on the inside.
2. The pipe material is prone to corrosion or wear.
3. The pipe needs to be upgraded for higher pressure or temperature ratings.
4. A smooth internal surface is required for fluid flow.
To ensure that the sleeve fits the particular application requirements, take into account variables such as pipe size, material, pressure rating, fluid properties, and installation technique when choosing a pipe internal insert sleeve.
A PetroSan pipe insert sleeve, which is commonly used in plumbing and piping systems, is intended to reinforce, protect, or repair the interior of a pipe or to connect pipes together. The sleeve is fitted into the end of a pipe or between two pipe sections and is made of materials that are compatible with the pipe being supported, such as FBE internal coated pipes, corrosion protection, high pressure resistance, and oil and gas flow accuracy. Its principal tasks include minimizing leaks by assuring a tighter fit, increasing pipe strength at joints or weakened places, and connecting pipes of different diameters or materials without extensive changes. Insert sleeves are essential for extending the service life of pipe systems and preserving their integrity and efficiency of fluid transport.
Pipe insert sleeve raw material specification.
Sleeve from Plate or Seamless Pipe
- API 5L PSL 1 & PSL 2 (Gr B, X46, X52, X56, X60, X65, X70) / ANSI/NACE MR0175 / ISO 15156 / HIC-SSC TEST .
- ASTM A333 GR. 6 / ASTM A53 GR. B / ASTM A106 GR. A, B, C.
- ASTM A36 / ASTM A516 Gr 60, Gr 65, Gr 70.
- ASTM A671 / ASTM A672 / ASTM A691.
- ASTM A312 / ASTM A358.
Piping Standard for pipe insert sleeve:
Pipe insert sleeves are designed to meet various piping standards, depending on the industry, region, and application. Some common piping standards for pipe insert sleeves include:
1. ASME (American Society of Mechanical Engineers).
2. ASTM (American Society for Testing and Materials).
3. API (American Petroleum Institute).
4. ANSI (American National Standards Institute).
5. MSS (Manufacturers Standardization Society).
6. ISO (International Organization for Standardization).
7. DIN (Deutsches Institut für Normung).
8. EN (European Norm).
9. BS (British Standard).
10. CSA (Canadian Standards Association).
These standards cover aspects such as:
– Material properties.
– Dimensions and tolerances.
– Surface finish.
– Corrosion resistance.
– Pressure and temperature ratings.
– Welding and assembly requirements.
– Testing and inspection procedures.
It’s essential to consult the relevant piping standard for the specific application and industry to ensure the pipe insert sleeve meets the required specifications and regulations.
Pipe Insert sleeve internal Coating types.
Various internal coatings for pipelines and pipe insert sleeves are used by the oil and gas sector to guarantee the efficient and safe transit of hydrocarbons. The following are a few typical internal coating kinds for oil and gas pipeline insert sleeves:
1. Epoxy Coatings: General-purpose, chemical-resistant, and abrasion-resistant epoxies.
2. Polyurethane Coatings: Flexible, abrasion-resistant, and chemical-resistant polyurethanes.
3. Polyester Coatings: Corrosion-resistant and abrasion-resistant polyesters.
4. Fluoropolymer Coatings (FPC): Non-stick, chemical-resistant, and abrasion-resistant FPCs like Teflon, Kynar, and Halar.
5. Ceramic Coatings: Hard, corrosion-resistant, and abrasion-resistant ceramic coatings.
6. Silicone Coatings: Heat-resistant and chemical-resistant silicones.
7. Phenolic Coatings: Corrosion-resistant and abrasion-resistant phenolics.
8. Novolac Coatings: High-temperature and chemical-resistant novolacs.
9. Plural Component Coatings: Hybrid coatings combining different materials for enhanced performance.
10. Internal Plastic Coatings (IPC): Thin, corrosion-resistant plastic coatings like PE, PP, and PVC.
Pipe Insert Sleeve Epoxy Coating Specification:
There are several varieties of epoxy coatings for pipe internal insert sleeves, and each has special qualities and advantages. Typical forms of epoxy coatings include the following:
1. General-purpose epoxy: A standard epoxy coating for general applications.
2. High-build epoxy: Thick, heavy-duty coating for added durability.
3. Chemical-resistant epoxy: Designed to withstand corrosive fluids and chemicals.
4. Heat-resistant epoxy: Withstands high temperatures, ideal for steam or hot water pipes.
5. Abrasion-resistant epoxy: Enhanced wear resistance for pipes subject to friction or abrasion.
6. Non-stick epoxy: Coating with low friction properties, reducing sediment buildup.
7. Antimicrobial epoxy: Inhibits growth of bacteria, mold, and mildew.
8. UV-resistant epoxy: Resists degradation from ultraviolet light exposure.
9. Low-temperature epoxy: Flexible and crack-resistant in cold temperatures.
10. High-gloss epoxy: Smooth, shiny finish for easy cleaning and inspection.
11. Epoxy phenolic: Combines epoxy and phenolic resin for enhanced chemical resistance.
12. Epoxy novolac: Offers improved heat and chemical resistance.
These epoxy coatings can be formulated to meet specific requirements, such as:
Pipe Insert Sleeve Manufacturing types :
Manufacturer of insert sleeve, Manufacturer of pipe sleeve, Manufacturer of pipe sleeve, Manufacturer of corrosion protective sleeve, Manufacturer of pipe protective sleeve, Manufacturer of powder coated sleeve, Manufacturer of epoxy coated pipe sleeve, Manufacturer of insert sleeves for internal coated pipes, Manufacturer of pipe internal insert sleeve, Manufacturer of Insert sleeve, Manufacturer of Pipe ID insert sleeve, Manufacturer of Petro pipe insert sleeve, Manufacturer of Internal pipe Sleeve, Manufacturer of Steel pipe insert sleeve.
We Manufacture, Export and supply to many Countries as follows :
- ASIA – India, Japan, Thailand, Singapore, Sri lanka, Bangladesh, South Korea, Indonesia, Philippines, Vietnam, Kazakhstan, Azerbaijan, Turkmenistan.
- Middle East – Kuwait, Dubai, Saudi Arabia, Qatar, Oman, Bahrain, Jordan, Turkey, Iraq, Yemen, Syria, Azerbaijan, United Arab Emirates, Israel.
- Western Europe – Germany, France, Netherlands, Belgium, Austria, Switzerland, Luxembourg, Monaco, Liechtenstein
- Eastern Europe – Russia, Ukraine, Poland, Romania, Czechia, Hungary, Belarus, Bulgaria, Slovakia, Moldova
- Northern Europe – United Kingdom, Sweden, Denmark, Finland, Norway, Ireland, Lithuania, Latvia, Estonia, Iceland, Isle of Man, Faeroe Islands
- Southern Europe – Italy, Spain, Greece, Portugal, Serbia, Croatia, Bosnia and Herzegovina, Albania, North Macedonia, Slovenia, Montenegro, Malta, Andorra, Gibraltar, San Marino, Holy See
- South America – Argentina, Chile, Brazil, Colombia, Paraguay
- Western Africa – Nigeria, Ghana, Côte devoir, Niger, Burkina Faso, Mali, Senegal, Guinea, Benin, Togo, Sierra Leone, Liberia, Mauritania, Gambia, Guinea-Bissau, Cabo Verde, Saint Helena
- Northern Africa – Egypt, Sudan, Algeria, Morocco, Tunisia, Libya, Western Sahara
- Southern Africa – South Africa, Namibia, Botswana,Lesotho, Swaziland
- Eastern Africa – Ethiopia, Tanzania, Kenya, Uganda,Mozambique, Madagascar, Malawi, Zambia, Zimbabwe, South Sudan, Rwanda, Burundi, Somalia, Eritrea, Mauritius, Djibouti, Réunion, Comoros, Mayotte, Seychelles